
If your kitchen looks dated but the units themselves are still in good condition, you may not need to replace the whole kitchen. Fitting new kitchen doors and drawer fronts can change the colour, style and finish of the room while keeping the existing cabinet carcasses in place.
This is often a more cost-effective way to update a kitchen on a budget, with less waste and disruption than removing the units and starting again. Before ordering replacement doors, however, it’s important to check that your existing cabinets are suitable and take accurate measurements.
Step 1: Check Whether Your Kitchen Units Are Worth Keeping
Start by looking beyond the condition of the existing doors. Scratched, faded or dated doors aren’t necessarily a problem because they’re the parts you’re replacing. It’s the cabinet carcasses behind them that matter.
Open each cupboard and check the sides, shelves, base and back. You’re looking for units that are stable, reasonably square and securely fixed. Pay particular attention to cabinets around the sink, dishwasher and other areas where water damage is more likely.
Signs that a carcass may need replacing include significant swelling, crumbling chipboard, persistent damp, badly distorted panels or units that have become unstable.
Check the areas where the hinge mounting plates attach to the cabinet too. The screws should hold firmly. Minor damage around an individual hinge fixing doesn’t always mean the entire cabinet needs replacing, as hinge repair plates and other suitable repairs may sometimes resolve localised damage.
If the majority of the carcasses are structurally sound, replacing the visible fronts can be a much more practical option than removing the entire kitchen.
Step 2: Measure Your Existing Kitchen Doors
Accurate measurements are essential when ordering replacement kitchen doors.
Rather than assuming the size based on the cabinet itself, measure the existing door or drawer front. Kitchen units aren’t all manufactured to identical dimensions, even though common cabinet widths such as 300mm, 400mm, 500mm and 600mm are widely used.
Remove any assumptions from the process and measure each existing door in millimetres, recording the height and width carefully.
It’s useful to create a simple list showing where every door belongs, for example:
- Sink base left: 715mm x 496mm
- Sink base right: 715mm x 496mm
- Wall unit: 715mm x 396mm
- Drawer front: 140mm x 596mm
Double-check every measurement before ordering, particularly if you have older units or cabinets from several different manufacturers.
Step 3: Measure the Hinge Positions
Don’t assume your new doors can use a standard hinge position. Although 35mm concealed hinge cups are commonly used, the drilling positions vary between kitchen manufacturers and cabinet types.
For a door with two hinges, measure from the top edge of the door to the centre of the top hinge cup, followed by the bottom edge to the centre of the bottom hinge cup.
For taller doors with three or more hinges, record all hinge centres from the top edge.
You’ll also need to know which side the hinges are on. Viewed from the front of the cabinet, note whether each door is left or right hung.
Take your time with this stage. Correct dimensions and hinge positions can make fitting the replacement doors considerably easier.
Step 4: Choose Your New Door Style and Finish
Once you know the cabinets can be reused and have your measurements, you can concentrate on how you want the updated kitchen to look.
Replacing the doors gives you the opportunity to make a fairly significant design change without altering the layout. You could replace an older traditional design with simple matt slab doors, introduce a handleless style, choose high-gloss fronts or update the room with Shaker kitchen doors.
Hot Doors stocks replacement doors in standard and made-to-measure sizes, with options including traditional and woodgrain, matt, high-gloss and handleless designs.
Door samples are available across many ranges, which can be useful before ordering an entire kitchen. A sample allows you to see the actual colour and finish in your kitchen and compare it with the flooring, wall colour and worktop.
Step 5: Remove the Existing Kitchen Doors
Before removing anything, label the existing doors so you know which cabinet each one came from. This is particularly helpful if you’re using their dimensions and hinge positions as a reference during installation.
Emptying the cupboards isn’t normally necessary, but clearing items away from the hinges will make access easier.
With concealed hinges, the exact removal method depends on the hinge fitted. Many modern hinges have a clip mechanism that allows the hinge arm to detach from the mounting plate. Others may need to be unscrewed.
Support the door while releasing the hinges so its weight doesn’t pull against the final fixing.
If you’re replacing drawer fronts as well, check how each front attaches to the drawer box before attempting removal. Drawer systems differ, so don’t assume they will all release in the same way.
Step 6: Fit the Hinges to Your Replacement Doors
If you’ve ordered your replacement doors with suitable hinge drilling, fit the hinges into the pre-drilled cups on the back of each door.
Depending on your existing hinge system and its condition, you may be able to reuse the hinges. If they’re worn, damaged or no longer operating properly, this can also be a sensible time to replace them with compatible fittings.
Attach or clip each hinge to its mounting plate while supporting the weight of the door. Don’t fully judge the alignment at this stage. Small differences between adjacent doors can normally be corrected using the hinge adjustments.
Step 7: Adjust the Doors
Most concealed cabinet hinges allow adjustment in several directions. Depending on the hinge, adjustments can alter the door’s side-to-side position, its distance from the cabinet and its vertical position.
Work gradually rather than making large adjustments to a single hinge.
Look at the gaps between neighbouring doors and drawer fronts as you work. The aim is to achieve consistent spacing across the run of cabinets while making sure each door opens and closes freely without rubbing against the door beside it.
Once you’re happy with the alignment, check all fixings are secure.
Updating More Than Just the Doors

New doors can make a significant difference by themselves, but you can take the kitchen update further without replacing the cabinets.
Matching end panels and plinths can help cover older finishes that no longer suit your new doors. Changing the door handles can also alter the character of the kitchen, particularly when moving from a traditional door style to something more contemporary.
If the existing worktops are also showing their age, replacing them at the same time can make the room feel substantially newer. Hot Doors stocks laminate, compact laminate, solid wood and solid surface worktops, along with splashbacks and upstands, so these elements can be chosen alongside your replacement doors.
You don’t have to change everything at once. One of the advantages of retaining sound kitchen units is that you can decide which visible elements actually need updating and spend your budget accordingly.
A Cost-Effective Alternative to Replacing the Whole Kitchen
A full kitchen replacement can involve removing cabinets, disconnecting appliances, disposing of old units and potentially carrying out additional plumbing, electrical, flooring or decorating work.
If the layout works for you and the existing carcasses remain in good condition, much of that work may be unnecessary.
Replacing the cupboard doors and drawer fronts focuses your budget on the parts of the kitchen you see every day. It also creates less disruption because the existing units can remain where they are.
The important part is checking the cabinets first and measuring carefully. If either the carcasses or measurements aren’t right, new doors won’t solve the underlying problem.
Order Replacement Kitchen Doors from Hot Doors
Hot Doors offers replacement kitchen doors in a wide range of colours, styles and finishes, with standard sizes and made-to-measure options available across many ranges. Hinge drilling is also available on selected doors, helping you order replacements to suit your existing kitchen.
Browse the Hot Doors range and order your replacement doors online for fast UK delivery, or call 01279 883099 for advice from the team if you need help with measurements, hinge positions or choosing the right doors for your kitchen.
